Talkswitch CT.TS005.003902 User Manual page 31

• Within 1.5m of a power socket.
• Close to telephone company demarcation point for telephone lines, or
sockets, and any in-building telephone wiring connection point.
• Away from any electronic devices that emit radio signals.
• Away from hazardous or explosive materials.
When installing multiple TalkSwitch units, do not stack units on top of each
other.
If TalkSwitch has been exposed to low temperatures prior to installation,
wait until the system has reached room temperature before connecting the
power cord to avoid damage due to condensation.
Caution: Use only the power adapter and power cord supplied with your
TalkSwitch. Check the supply voltage matches the rating on the power
adapter label. If your supply voltage does not match the power adapter
rating, please consult your reseller. For safe operation, the TalkSwitch
power adapter must be connected to a power supply socket with a third
pin (ground/earth).
Caution: Surge protection devices are recommended to protect
TalkSwitch in areas subject to lightning or power surges. Please consult
your reseller for recommended surge protection devices.
Wiring
Make the most of your phone system with optimal home/office wiring. If you
need help wiring your house or small office and are not sure where all the
jacks are or what colors of wires to use, refer to Appendix H: Home/Office
Wiring Guide on page 257.
Figure 6: An example of residential wiring
T A L K S W I T C H U S E R G U I D E 1 1