Setting Up Notification By Pager; Setting Up The Notification Options - Talkswitch CT.TS005.003902 User Manual

• Select the second option to have TalkSwitch repeat notification until
the user either dials
the message. This is useful for cell phones where the telephone
company plays a "subscriber not available" message instead of a busy
tone.

Setting up notification by pager

1. Select the Dialed Notification tab.
2. Select the Pager check box.
3. Enter the Pager number. Enter the number as you would normally dial it
(i.e. without the line hunt group number). You can enter digits 0-9,
space, dash, comma,
seconds.
4. Enter the Numeric message that will appear on the user's pager.

Setting up the notification options

If the TalkSwitch system will phone and/or page the user, configure the
notification options.
If the system will both phone and page the user, the system will continue
the notification attempts until the user has been both phoned and paged.
1. Click Configure Notification Options.... The Configure Notification
Options window appears.
2. Select the line hunt group that the TalkSwitch system will use to phone
or page the user.
3. Select the number of times that the TalkSwitch system will let the
number ring before aborting each attempt, ranging from 1 time to 10
times.
8 2
to skip the message, or dials
and . A comma pauses dialing for two
T A L K S W I T C H CO NFIGURATIO N
to play