Table of Contents
Advertisement
3. Pick up another line and dial the number of the other outside party. Dial
9 or another hunt group before dialing the second phone number.
4. When the call is answered, press Conf to establish the 3-way call.
The second method uses the telephone company's 3-Way Calling/Conference
service.
1. Establish a call with an outside party.
2. Press Hold to place the outside caller on hold.
3. At the dial tone, enter 80, dial the number of the other outside party
and press Dial, Send or
4. When the call is answered, press Transfer to establish the 3-way call.
USING LINE APPEARANCE WITH TALKSWITCH IP PHONES
About line appearance
The line appearance feature is available on the TalkSwitch TS-9133i and
TS-480i IP phones. It uses up to seven programmable keys on the TS-9133i
and up to 14 softkeys on the TS-480i. The keys allow the user to access
TalkSwitch features, and to monitor and engage lines, extensions, and
queued calls.
Line appearance on a TS-9133i
The following line appearance functions can be programmed on the
TalkSwitch TS-9133i.
•
None — The key is not programmed.
•
Line Appearance — Shows the status of a telephone line or VoIP number,
and allows you to access it. The LED will be off if the line is available;
flashing if the line is ringing an extension; and on solid if the line is
being used. Press the key to immediately connect the extension to the
line. You do not have to dial the line hunt group number.
•
Extension Appearance — Shows the status of a local extension, and
allows you to access it. The LED will be off if the extension is on-hook;
flashing if the extension is ringing or on hold; and on solid if the
extension is being used. Press the key to ring the extension.
T A L K S W I T C H U S E R G U I D E
.
1 6 1
Advertisement
Table of Contents
Troubleshooting
