Talkswitch CT.TS005.003902 User Manual page 38

Figure 9: Dual-line phone on one jack
TalkSwitch Jacks
Incoming Phone Lines
Line Splitter
Extension 111
Figure 10: Dual-line phone on two jacks
Incoming Phone Lines
Extensions 111 and 112
Figure 11: Dual-line phone on splitter
Incoming Phone Lines
Line Splitter
Extensions 111 and 112
Figure 12: Four-line phone on two splitters
Incoming Phone Lines
Line Splitter
Extensions 111, 112, 113
1 8
TalkSwitch extension 111 is connected
to a dual-line phone using one
E1 E2 E3 E4
extension jack. Calls on extension 111
show Line 1 as active.
TalkSwitch extensions 111 and 112 are
connected to a dual-line phone using
TalkSwitch Jacks
E1 E2 E3 E4
two extension jacks. Calls on extension
111 show Line 1 as active. Calls on
extension 112 show Line 2 as active.
TalkSwitch extensions 111 and 112 are
connected to a dual-line phone using a
TalkSwitch Jacks
line splitter. Calls on extension 111
E1 E2 E3 E4
show Line 1 as active. Calls on
extension 112 show Line 2 as active.
Jacks 111, 112, 113 and 114 are all
wired to the four-line phone. When a
TalkSwitch Jacks
E1 E2 E3 E4
call is transferred to extension 111,
Line 1 on the phone shows as active.
Line Splitter
Calls on extension 112 show Line 2 as
4-Line Phone
active and so on. You can configure
114
&
each incoming line to ring any given
number of extensions. Configure
incoming Line 1 to ring extension 111,
Line 2 to ring extension 112, etc.
T A L K S W I T C H I NSTA LLATIO N