Configuring A Talkswitch System For Voip - Talkswitch CT.TS005.003902 User Manual

Fifty VoIP numbers (250 to 299) permit direct dialing from any extension or
auto attendant in the network. Additional VoIP numbers outside of this
range can also be added. However the additional VoIP numbers will not
permit direct dialing. They will have to be prefixed by a line hunt group that
selects a VoIP line. See VoIP Numbers on page 202 for details.
For VoIP calls made through a VoIP service provider, the service provider will
assign the VoIP numbers to be used for their service.
To assist in assigning VoIP numbers for your network, use the VoIP network
administration form on page 213.
Assigning VoIP numbers in your TalkSwitch configuration is described in VoIP
Numbers on page 202.
Example: Continuing with the previous example, five VoIP numbers are
assigned in San Francisco (251 to 255), nine are assigned in New York (261 to
269), and one is assigned to the teleworker office in Miami (271). These VoIP
numbers can be dialed directly from an extension or from an auto attendant
from any location within the network.
Figure 23: TalkSwitch network configuration
San Francisco
office
251
252
253
254
255
TalkSwitch 48-CVA
(SIP server)

Configuring a TalkSwitch system for VoIP

Set up the following pages in the TalkSwitch configuration software:
• System Information > IP Configuration
• System Information > VoIP Configuration
• System Information > VoIP Numbers
1 9 2
Telephone
Network
Internet
New York office
261 266
262 267
263 268
264 269
265
TalkSwitch 48-CVA
Miami home
271
Mediatrix 2102
V O I P I N F O R M A T I O N