Removing An Access Code; Audio Controls; Calibrating Telephone Lines - Talkswitch CT.TS005.003902 User Manual

3. Change the name or access code, and then click OK.

Removing an access code

1. Select a user in the Access Code Assignments area.
2. Click Remove.

AUDIO CONTROLS

The Options > Audio Controls page allows you to calibrate the telephone
lines. This adjusts the outbound volume level and matching impedance for
each telephone line of the TalkSwitch unit. You can override the settings if
required. You can also set the inbound volume for the analog local
extensions.
All controls on this page update the TalkSwitch unit in real time. This allows
you to adjust levels without saving the configuration.

Calibrating telephone lines

1. Expand Options > Audio Controls.
2. Click Calibrate Lines.... See Calibrating telephone lines on page 47.
1 3 0 T A L K S W I T C H CO NFIGURATIO N