Power Failure; Change Password Frequently; Pbx Fraud; Emergency Service Numbers - Talkswitch CT.TS005.003902 User Manual

Power failure

The equipment will not operate when mains power fails.
Please ensure that a standard telephone that does not require mains power is
connected to extension jack E4 for emergency use. During a power failure
telephone line port L1 will connect to extension jack E4 (except–AU models).

Change password frequently

Setting and frequently changing the administrator password is recommended
to avoid unauthorized changes to system configuration and settings.

PBX fraud

It is recommended that call bridge (DISA) and call back passwords are
changed frequently to avoid unauthorized users making telephone calls
through the TalkSwitch.

Emergency service numbers

Ensure emergency service numbers are not blocked by the toll restriction
feature. Frequently used emergency service numbers are pre-programmed to
avoid blocking, but other local numbers may be used in some locations.
Before routing any emergency service numbers to a VoIP service provider,
check that they do handle emergency service calls and any conditions
associated with this service.

Call redirection and service provider billing advisory

Use of the automatic route selection, toll restriction and call detail recording
features does not imply any guarantee whatsoever by regulatory authorities,
telephone service provider(s), TalkSwitch or its distributors and resellers,
with regard to the accuracy of these features and that the use of such a
features may not be considered by a telephone company in any disputes
which may arise regarding the accuracy of any subscriber's telephone
account.

Cleaning

Use a slightly moistened cloth or an anti-static cloth to clean TalkSwitch. Do
not use any solvents. Never use a dry cloth; electrostatic charges could
damage the electronics in the system. Ensure, however, that no moisture
penetrates into TalkSwitch, which can result in damage.
X V I P R E F A C E