Talkswitch CT.TS005.003902 User Manual page 74

3. Select the Activate Automatic Route Selection check box.
4. Enter the leading digits in the Leading Digits box.
5. Select the Action. Choices are:
• Hunt Group (n) — Performs ARS by routing the call to the line hunt
group.
• Block Calls — Performs toll restriction by blocking the call.
6. If required, set up the carrier code(s).
a) If the route requires one carrier code for the whole day:
i) Enter the carrier code in Carrier Code 1.
ii) Select the All Day check box.
b) If the route requires one carrier code for part of the day:
i) Enter the carrier code in Carrier Code 1.
ii) Enter Start Time 1.
iii) Enter Start Time 2.
c) If the route requires two carrier codes, one for each part of the day:
i) Enter the first carrier code in Carrier Code 1.
ii) Enter Start Time 1.
iii) Enter the second carrier code in Carrier Code 2.
iv) Enter Start Time 2.
5 4 T A L K S W I T C H CO NFIGURATIO N