•
Play music whose source is connected to the MUSIC jack
•
Play music from file loaded on TalkSwitch
3. If you selected Play music from file loaded on TalkSwitch:
a) Create an 8 kHz, 8 bit, Mono, u-Law .wav file that contains the music
or recorded message.
You can convert .mp3 and other file formats to .wav with a utility
like Audio Converter and Ripper from www.audioi.com.
b) Click Load wav file. The following window appears.
c) Click Yes. The Load Audio File window appears.
d) Select an 8 kHz, 8 bit, Mono, u-Law .wav file, and then click Open.
4. Adjust the volume of music on hold.
a) Check the volume by placing a test call and going on hold.
b) Change the volume by setting the Playback volume for music file list.
Choices are:
•
Loudest
•
Louder
•
Default
•
Quieter
•
Quietest
c) Choose File > Save settings to TalkSwitch. Alternatively, you can
click the Save settings to TalkSwitch icon.
You must save the configuration for the volume setting to take
effect.
d) Repeat Steps a to c.
T A L K S W I T C H U S E R G U I D E
7 7