Talkswitch CT.TS005.003902 User Manual page 84

Table of Contents

Advertisement

If you connect an unsupported IP phone, select Other IP Phone. Other IP
phones that support the G.711 codec may work with the system, but
some features may not work. As TalkSwitch cannot enable special
features, or customization of these IP phones, further configuration will
be limited to the programmable options on the phone itself.
8. Set the Location of the phone. Choices are:
Internal - An internal IP phone is located within the office, and is
connected to the same LAN as the TalkSwitch unit.
External - An external IP phone is located outside the office, and is
connected to the TalkSwitch unit via internet. The TalkSwitch unit
must have a VoIP module.
9. If you set Location to External, then select the Time Zone of the external
IP phone.
10. If you selected Counterpath - Eyebeam or Other IP Phone, enter the
Username and Password. The default settings are user[extension number]
and pass[extension number]. These are used to manage calls between
TalkSwitch and the IP extension and must match the username and
password of the IP phone. Change only if required.
11. If you selected TalkSwitch, Polycom or Grandstream, enter the MAC
Address for auto configuration of phone. The MAC Address is printed on
the bottom of the phone or on the phone's shipping box.
12. Select the language for prompts heard by callers in the Prompts language
for this extension list.
13. Select the phone numbers you want to display at the remote location
when VoIP calls are placed from this extension. If Default VoIP number is
selected, the phone number associated with the outgoing VoIP port is
used. This selection makes the most sense if your VoIP numbers have
been configured to handle all inbound calls the same way.
a) Select the Phone number used for TalkSwitch VoIP Caller ID box to set
the phone number displayed during a VoIP call between TalkSwitch
units.
b) Select the Phone number used for Service Provider Caller ID box to set
the phone number displayed during a VoIP call through a service
provider.
6 4
T A L K S W I T C H CO NFIGURATIO N

Advertisement

Table of Contents
loading

Table of Contents