Talkswitch CT.TS005.003902 User Manual page 90

• Extension Appearance — Select a local extension as the resource. A
status icon and caller ID will appear beside the softkey. The On-Hook
icon appears if the extension is available. The Ring icon appears if
the extension is ringing or on hold. The Off-Hook icon appears if the
extension is being used. Press the softkey to ring the extension.
• Queue Appearance — Select a local extension as the resource. A
status icon, extension number and "Queue" will appear beside the
softkey. The On-Hook icon appears if the extension has no calls
queued. The Ring icon appears if the extension has one or more calls
queued. Press the softkey to connect with the oldest queued call.
• VoiceMail — Do not select a resource. Press the Voice Mail softkey to
access the voice mailbox of the local extension. If the Voice Mail
softkey is not programmed, press
• DND — Do not select a resource. Press the DND softkey to toggle Do
Not Disturb mode, and then press DND ON or DND OFF. If the DND
softkey is not programmed, press
• Park — Do not select a resource. Press the Park softkey to put the
call on hold in the next available park orbit. The system will respond
with the park orbit number (500 to 509). If the Park softkey is not
programmed, press k,
• Un-park — Do not select a resource. Press the Unpark softkey, select
the park orbit number (500 to 509), and then press Unpark to
retrieve the call. Note that caller ID appears beside the park orbit
number. If the Unpark softkey is not programmed, press
dial the park orbit number, and then press Dial.
• Pickup Any — Do not select a resource. Press the Pickup Any softkey
to answer a call ringing any extension. If the Pickup Any softkey is
not programmed, press
• Pickup Ext — Do not select a resource. Press the Pickup Ext softkey,
dial an extension, and then press Pickup to answer a call ringing the
extension. If the Pickup Ext softkey is not programmed, press
7, dial the extension, and then press Dial.
• Queue (Show List) — Do not select a resource. Press the Queue
softkey, select a queued call, and then press Retrieve to connect
with the selected call. If the Queue softkey is not programmed, this
functionality is not otherwise available.
7 0
62 Dial.
510, and then press Dial.
9, and then press Dial.
T A L K S W I T C H CO NFIGURATIO N
Dial.
,