Functions You Can Enter From Local Extensions - Talkswitch CT.TS005.003902 User Manual

FUNCTIONS YOU CAN ENTER FROM LOCAL EXTENSIONS

The following table lists functions that can be entered from local extensions.
On an analog extension, press Flash. On an IP extension, press Hold.
Keys
Flash/Hold
Flash/Hold
Flash/Hold at
external dial tone
and mailbox
number (local,
remote or general
voicemail)
and
mailbox number
(local, remote or
general voicemail)
Flash/Hold 4
On an analog extension, press Flash 4. On an IP extension, press Hold 4
followed by Dial, Send or
0
Flash/Hold 5
Flash/Hold
500–509
Flash/Hold
510
2 2 6 E X T E N S I O N N U M B E R S , F U N C T I O N S A N D C O M M A N D S
Function performed
If you are connected to a caller, Flash/Hold puts the
call on hold and you hear the internal dial tone.
Pressing Flash/Hold again at the internal dial tone
retrieves the most recent call on hold.
When you are connected to an outside line, pressing
Flash/Hold switches you to the internal dial tone.
Dials into a local, remote or general voice mailbox to
leave a message.
Accesses a local, remote or general voice mailbox.
You can retrieve messages, change greetings,
password, etc.
Accesses the mailbox associated with your extension.
Completes a transfer and returns to the internal dial
tone.
to complete the transfer.
External PA access to make an announcement
through the attached external PA system.
Disconnects the current caller and reconnects to the
last caller on hold. A conference-call initiator can
disengage the second conferenced party by pressing
Flash 5.
Press Flash/Hold to place a call on hold and then
press 500–509 to place the call in one of ten
park orbits.
Press Flash/Hold to place a call on hold and then
press 510 to place the call in the next available
park orbit, starting at 500.