Initial Configuration; Select Location For Installation - Talkswitch CT.TS005.003902 User Manual

Saving and retrieving the TalkSwitch configuration software accesses the
C:\Program Files\TalkSwitch\TalkSwitch Configuration
5.00\LastSavedConfig5.00.tsd file.
If you have to replace your computer, please download the latest install
file from our website and follow steps 2 and 3 above. Run the install
program. In case of a major system update, copy the back-up of your
configuration file to C:\Program Files\TalkSwitch\TalkSwitch
Configuration.

INITIAL CONFIGURATION

Once your software is installed and your TalkSwitch is connected directly to a
PC or via a switch/hub to the LAN, you can customize the TalkSwitch system
with the TalkSwitch configuration software.
If you connect TalkSwitch to your phone system, it will do the following:
• An incoming call on any line will ring all local extensions.
• A receptionist can manually transfer calls to local extensions or
voicemail.
• Every local extension will have a voice mailbox.
Recommendation: To minimize the disruption time of your telephone
lines during the system setup, we recommend that you configure the
unit before you connect all the local extensions and telephone lines to
the TalkSwitch unit.

SELECT LOCATION FOR INSTALLATION

Select a suitable location for installation of TalkSwitch.
TalkSwitch can be installed on a desktop or mounted on a wall. It can be
installed in a office or communications or utility room.
Choose a location that meets the following requirements:
• Ambient temperature between 0°C-35°C
• Away from heat sources, and direct sun light
• Avoid rooms with excessive humidity or dust
1 0 T A L K S W I T C H I NSTA LLATIO N