Talkswitch CT.TS005.003902 User Manual page 25

Port
MUSIC
PA
LAN
E1-E8
L1-L8
USB
MEMORY SLOT
POWER
T A L K S W I T C H U S E R G U I D E
The music connector is a 1/8" (3.5mm) mono phono
jack used as an audio input for the music on hold
feature.
The PA (public address) connector is a 1/8" (3.5mm)
mono phono jack used as an audio output for the
external paging feature.
The LAN connector is an RJ-45 jack used for
connection to a PC, connection of IP extensions,
connection of VoIP lines, and unit-unit networking.
There are three green LEDs on the right of the LAN
port. The top LED indicates network synchronization
(connection), the middle LED indicates data Rx
(receiving data), and the bottom LED indicates data Tx
(transmitting data).
The extension connectors are RJ-11 jacks for analog
extensions.
The line connectors are RJ-11 jacks for telephones
lines.
The USB connector is a standard USB jack for
connecting to a PC.
The memory card slot is a socket used with TalkSwitch
memory cards. Memory cards are not available in some
markets.
The power connector is a receptacle rated at 16 VAC/
1.5A for connecting the supplied AC adapter input
line.
Purpose
5