Two Outside Callers And One Local Extension; Using An Ip Extension - Talkswitch CT.TS005.003902 User Manual

Two outside callers and one local extension

There are two different methods for this type of conference call. The first
method is similar to the one above, using only TalkSwitch for the conference
function.
1. Establish a call with an outside party.
2. Place the outside caller on hold and dial the number of the other outside
party. Dial 9 or another hunt group before dialing the second phone
number unless you have Direct Line Access enabled.
3. When the call is answered, press Flash 6 to establish the 3-way call.
The second method uses the telephone company's 3-Way Calling/Conference
service.
1. Establish a call with an outside party.
2. Press Flash 80 to place the outside caller on hold and dial the number of
the other outside party.
3. When the call is answered, press Flash 6 to establish the 3-way call.
The conference initiator can disengage the second conferenced party at
any time by pressing Flash 5.

USING AN IP EXTENSION

This section describes how to use a third party IP phone with the TalkSwitch
system. You can also use these procedures with the TalkSwitch TS-9112i, TS-
9133i and TS-480i phones. However these phones have additional keys that
make it easier to access the functions. See Using Line Appearance with
TalkSwitch IP Phones on page 161, and refer to the install guide supplied
with your TalkSwitch phone.
1 5 4 U S I N G T A L K S W I T C H