Telephone Lines - Talkswitch CT.TS005.003902 User Manual

c) If you selected static, enter the Current public WAN IP address. This is
the static public IP address from your service provider. If the
TalkSwitch unit is not behind a router, this is the IP address of the
TalkSwitch unit that is acting as the local proxy.
d) Enter the Fully Qualified Domain Name (FQDN) if this location acts as
the SIP server and uses a dynamic public IP address. You can obtain
FQDNs for free at www.dyndns.org.
If your router supports DDNS, program the required information to
update the DNS servers. If not, download one of the applications
specified on the site. It needs to run on a PC connected to the same
LAN to update the DNS servers.
If the unit is enabled as a SIP server and no FQDN was entered, the
following prompt appears.

TELEPHONE LINES

The System Information > Telephone Lines page allows you to set up the
main number, distinctive ring 1 number, distinctive ring 2 number, and
telephone company services for each telephone line. After adding or
changing a line, you can calibrate the telephone lines.
The distinctive ring service provides one or two additional phone numbers to
the telephone line. Each phone number causes a different ring pattern. You
can set up separate call handling for the main number, distinctive ring 1
number, and distinctive ring 2 number.
• Main number corresponds to the normal ring pattern.
• Distinctive ring 1 corresponds to a double ring pattern.
• Distinctive ring 2 corresponds to a triple ring pattern.
4 4 T A L K S W I T C H CO NFIGURATIO N