Connect Talkswitch To A Network Or A Pc; Ethernet Connection - Talkswitch CT.TS005.003902 User Manual

CONNECT TALKSWITCH TO A NETWORK OR A PC

Connect the AC adapter provided with TalkSwitch from an electrical outlet to
the TalkSwitch unit. Never use a power adapter other than the one that came
in the TalkSwitch package.
To configure the TalkSwitch settings, connect the unit to the PC with the
TalkSwitch configuration software installed.

Ethernet connection

Sharing computer data and TalkSwitch voice data, on the same hub can
cause voice degradation during high traffic periods. For best results,
place TalkSwitch units on a switch, or on their own hub.
Figure 7: LAN connection
1. Connect TalkSwitch to your hub or switch using the supplied Ethernet
cable and connect your PC to the hub or switch using another standard
Ethernet (CAT 5) cable with RJ45 connectors.
2. If not already turned on, press the Power button on the front of your
TalkSwitch and turn on your computer.
1 2
An Ethernet cable is supplied with specific unit
models. This connection requires a LAN and a PC
on the same switch. Any PC on the LAN can
configure the unit.
T A L K S W I T C H I NSTA LLATIO N