Setting Reset; Rotate Copy - Muratec MFX-2830 Operation Manual

COPY
Chapter1

Setting reset

●Automatic reset
When the machine has not operated for a set period of time, any adjusted settings made during
the previous copy job will return to the default setting status.
The machine is programmed to reset after three minutes, however this can be changed by the
user. (see page 4-35)
●Using RESET
Press
RESET
settings for the next person.

Rotate copy

●Even if the paper is not loaded in the same orientation as the document, the machine will auto-
matically rotate the image to make copying possible.
●The direction of rotation is counterclockwise.
●During zoom in/out copying, the image will be rotated so that the document should fit on the pa-
per. However, the rotation will not be performed when the zoomed image is larger than the 11
17 width.
"
*Example: Automatic zooming of Letter
●Rotation is not performed when the paper size and zoom are specified.
●Rotation is not performed for custom size documents or when the document size cannot be auto-
matically detected.
●Rotation is not performed during Combine copy, Repeat, or XY zoom.
●Rotation copying is not performed to paper sizes other than Letter, Letter , Half-letter, and
Half-letter .
2-6
COPY Chapter1
●
to reset the settings
to return to the default values. When you finish copying, press
Basic Copy Features
11 ×17
→ " " or a 129% copy.
to reset the
RESET
" ×