Printer Functions
Preparations
Installing the drivers
To print with this machine from your computer, you will need to install a printer driver on your computer. Refer
to the Printer/Scanner Driver Guide for instructions on how to install the printer driver. The Printer/Scanner
Driver Guide is on the included driver CD.
Connecting the cables
Connecting directly to a computer with a USB cable
Connecting through a network
78
USB cable
10BASE-T/ 100BASE-T cable
Cable tie
Loop a USB cable and attach the ferrite core
Ferrite core
supplied with the machine as illustration below.
The USB cable loop should be about 5 cm
from the end.
Printer driver software
10 BASE-T/100 BASE-T hub
Ferrite core
Attach the ferrite core and cable tie to the
LAN cable as illustration below.
(The ferrite core and the cable tie are
supplied with the NIC option kit.)