Adjust The Monitor Speaker's Volume - Muratec MFX-2500 Operating Instructions Manual

Entering settings for your machine
If you turned off the alarm or the key tones in the steps above, your machine
gives you the option of setting the volume for the alarm and key tones, proceed
to step 9.
If you didn't turn any of these off, skip to step 11.
9
To set the "Alarm & Key Volume":
Select "Alarm & Key Volume" and press
[Enter].
Set the desired volume using the cursor key.
10
Press [Enter] to save the setting.
11
Press [Exit] to save the setting.
3.8

Adjust the monitor speaker's volume

Default setting: Medium.
You can set the volume of the monitor speaker, assuring that on-hook dialling will
be as loud (or as soft) as you require.
1
Press / on the control panel. You now should hear a dial tone.
MONITOR CALL
Important: If you don't hear a dial tone, make sure your fax machine is
plugged into a working phone line.
2
If the volume you hear is satisfactory, skip to step 4.
Otherwise, proceed to step 3.
3
Adjust the volume as you wish:
To turn the volume up, press .
To turns the volume down, press .
The LCD indicates the volume.
4
Press / again to hang up.
MONITOR CALL