3.7.2 Clearing the Unique Switches
Resets the unique switches to factory defaults.
1. From standby, press <Setting>, <*>, <0>, <4>.
2. Press [Switch Clear].
3. Press [Yes]. The unique switches will reset to factory defaults.
Note: To finish the operation without clearing the switches, press [No].
4. Press [Reset] to return the machine to standby.
About the "" symbol at the list
The "" at the list indicates that you can set the switch respectively for the second phone line. See "3.25
Multi Line Settings" on page 3-141 for the setting.
3-80