Internet Group Management Protocol (Igmp) Status; Vlan Information - HP ProCurve Series 4100GL Management And Configuration Manual

Internet Group Management Protocol (IGMP) Status

The switch uses the CLI to display the following IGMP status on a per-VLAN
basis:
Show Command
show ip igmp
show ip igmp <vlan-id>
show ip igmp group <ip-addr> Lists the ports currently participating in the specified group,
For example, suppose that show ip igmp listed an IGMP group address of
224.0.1.22. You could get additional data on that group by executing the
following:
Figure B-14. Example of IGMP Group Data
Monitoring and Analyzing Switch Operation
Output
Global command listing IGMP status for all VLANs configured
in the switch:
• VLAN ID (VID) and name
• Active group addresses per VLAN
• Number of report and query packets per group
• Querier access port per VLAN
Per-VLAN command listing above IGMP status for specified
VLAN (VID)
with port type, Access type, Age Timer data and Leave Timer
data.
Status and Counters Data
B-19