Ate Enable Command Echo - Siemens TC63 Command Set

TC63 AT Command Set
4.5 ATE
4.5

ATE Enable command echo

The command determines whether or not the TA echoes characters received from TE during command
ATE
state.
Syntax
Exec Command
ATE[<value>]
Response(s)
OK
Reference(s)
V.250
Parameter Description
(num)(&W)(&V)
<value>
[0]
(&F)
1
Note
• In case of using the command without parameter,
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
!
Echo mode off
Echo mode on
<value>
Page 93 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
is set to 0.
s
Last
% % ! % !
5/24/05