At+Cnmi New Sms Message Indications - Siemens TC63 Command Set

TC63 AT Command Set
13.11 AT+CNMI
13.11

AT+CNMI New SMS message indications

Syntax
Test Command
AT+CNMI=?
Response(s)
+CNMI: (list of supported<mode>s), (list of supported <mt>s), (list of supported <bm>s), (list of supported
<ds>s), (list of supported <bfr>s)
OK
Read Command
AT+CNMI?
Response(s)
+CNMI: <mode>, <mt>, <bm>, <ds>,
OK
Write Command
AT+CNMI=[<mode>][, <mt>][, <bm>][, <ds>][, <bfr>]
Response(s)
OK
ERROR
+CMS ERROR
Reference(s)
GSM 07.05
Unsolicited Result Codes
URC 1
<mt>=1:
+CMTI: <mem3>, <index>
Indicates that new message has been received
URC 2
<mt>=2 (PDU mode enabled):
+CMT: <length>
<CR><LF>
Indicates that new message has been received
URC 3
<mt>=2 (text mode enabled):
+CMT: <oa>, <scts>[, <tooa>, <fo>, <pid>, <dcs>, <sca>, <tosca>,
<length>]
<CR><LF>
Indicates that new message has been received
URC 4
<bm>=2 (PDU mode enabled):
+CBM: <length>
<CR><LF>
Indicates that new cell broadcast message has been received
TC63_ATC_V00.490
Confidential / Draft - Do not copy
<bfr>
<pdu>
<data>
<pdu>
Page 337 of 501
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
s
% % % !
Last
% !
5/24/05