Siemens TC63 Command Set page 181

TC63 AT Command Set
8.2 AT+COPS
Read Command
AT+COPS?
Response(s)
ERROR
+CME ERROR: <err>
Write Command
AT+COPS=<mode>[, <format>[, <oper>]]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s)
GSM 07.07
Parameter Description
(num)
<opStatus>
Status
0
1
2
3
(str)
<oper>
Operator
If test command: Operator name in long alphanumeric format and numeric format.
If read command: Operator name as per <format>.
If write command: Operator name in numeric format.
(num)(&V)
<mode>
Parameter values 0 and 1 are stored non-volatile in the TC63.
(D)
0
1
2
3
4
(num)(&W)(&V)
<format>
(&F)
0
2
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
§
Unknown
Operator available
Current operator
Operator forbidden
Automatic mode;
<oper>
Manual operator selection
Write command requires
Read command returns the current
<oper>. If no operator is selected,
Manually deregister from network and remain unregistered until <mode>=0 or
1 or 4 is selected.
Set only (for
<format> AT+COPS
Automatic / manual selection; if manual selection fails, automatic mode
(<mode>=0) is entered (<oper>
Long alphanumeric format of <oper>. Can be up to 16 characters long.
Numeric format of <oper>. This is the GSM Location Area Identification (LAI)
number, which consists of the 3-digit Mobile Country Code (MCC) plus the 2-
or 3-digit Mobile Network Code (MNC).
Page 181 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
field is ignored.
in numeric format, i.e.
<oper>
<mode>
and
<format>
read command).
field will be present).
s
(Continued)
Last
% % ! !
shall be 2.
<format>
and the currently selected
are omitted.
<oper>
5/24/05
!