At+Csca Sms Service Centre Address - Siemens TC63 Command Set

TC63 AT Command Set
13.13 AT+CSCA
13.13

AT+CSCA SMS service centre address

Syntax
Test Command
AT+CSCA=?
Response(s)
OK
Read Command
AT+CSCA?
Response(s)
+CSCA: <sca>, <tosca>
OK
Write Command
AT+CSCA=<sca>[, <tosca>]
Response(s)
OK
Reference(s)
GSM 07.05
Command Description
Write command updates the SMSC address, through which mobile originated SMs are transmitted. In text mode,
setting is used by send and write commands. In PDU mode, setting is used by the same commands, but only
when the length of the SMSC address coded into
Notes
• In case of using no parameter after AT+CSCA= the content of
• This command writes the service centre address to non-volatile memo
• The SMS service centre address should be entered as specified by the service provider
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
parameter equals zero.
<pdu>
<sca>
Page 342 of 501
s
% % % !
will be deleted
Last
% !
5/24/05