TC63 AT Command Set
7.21 AT+CLCC
3
4
5
6
7
8
9
(num)
<mpty>
0
1
(str)
<number>
Phone number in format specified by
(num)
<type>
Type of address octect
145
129
(str)(+CSCS)
<alpha>
Alphanumeric representation of
should be the one selected with command
The maximum displayed length of
first 15 characters are displayed. To indicate an overflow, a special character will be used as the 16th character.
This is a space if the character set selected with
Due to time constraints on the necessary evaluation of the phonebook, this parameter may show a default value
in early call phases (e.g. for <stat>= ''dialing'', ''incoming'' or ''alerting''), even if a phonebook entry is present
for the number concerned.
Note
•
Teleservices other than voice, data, fax are not fully supported by ME. They are used only in connection with
the handling for AT+CSNS, and may therefore occur in parameter
TC63_ATC_V00.490
Confidential / Draft - Do not copy
Voice followed by data, voice mode (only in connection with single numbering
scheme AT+CSNS)
Alternating voice/data, voice mode (only in connection with single numbering
scheme AT+CSNS)
Alternating voice/fax, voice mode (only in connection with single numbering
scheme AT+CSNS)
Voice followed by data, data mode (only in connection with single numbering
scheme AT+CSNS)
Alternating voice/data, data mode (only in connection with single numbering
scheme AT+CSNS)
Alternating voice/fax, fax mode (only in connection with single numbering
scheme AT+CSNS)
Unknown
Call is not one of multiparty (conference) call parties
Call is one of multiparty (conference) call parties
<type>
Dialing string
<number>
Otherwise
corresponding to the entry found in phonebook; used character set
<number>
(Select TE Character Set).
AT+CSCS
is 16 characters. If
<alpha>
AT+CSCS
Page 165 of 501
includes international access code character '+'
has more than 16 characters, only the
<alpha>
is 'GSM', or 'E400' if the character set is 'UCS2'.
for mobile terminated calls.
<mode>
s
5/24/05