At+Crlp Select Radio Link Protocol Parameters For Originated Non-Transparent Data Calls - Siemens TC63 Command Set

TC63 AT Command Set
7.20 AT+CRLP
7.20 AT+CRLP Select radio link protocol parameters for originated
non-transparent data calls
The write command sets radio link protocol (RLP) parameters used when non-transparent data calls
AT+CRLP
are originated. The read command returns the current settings for the supported RLP version 0.
Syntax
Test Command
AT+CRLP=?
Response(s)
+CRLP: (list of supported<iws>s), (list of supported<mws>s), (list of supported<T1>s), (list of
supported<N2>s)
OK
Read Command
AT+CRLP?
Response(s)
+CRLP: <iws>, <mws>, <T1>,
OK
Write Command
AT+CRLP=[<iws>[, <mws>[, <T1>[, <N2>]]]]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s)
GSM 07.07
Parameter Description
(num)(&W)(&V)
<iws>
Interworking window size (IWF to MS)
(&F)
0...61
(num)(&W)(&V)
<mws>
Mobile window size (MS to IWF)
(&F)
0...61
(num)(&W)(&V)
<T1>
Acknowledgement timer (T1 in 10 ms units)
(&F)
48...[78] ...255
(num)(&W)(&V)
<N2>
Re-transmission attempts N2
(&F)
1...6 ...255
TC63_ATC_V00.490
Confidential / Draft - Do not copy
<N2>
PIN
!
Page 163 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% ! % %
s
Last
! ! ! % !
5/24/05