At+Cgeqreq 3G Quality Of Service Profile (Requested) - Siemens TC63 Command Set

TC63 AT Command Set
11.8 AT+CGEQREQ
11.8

AT+CGEQREQ 3G Quality of Service Profile (Requested)

Syntax
Test Command
AT+CGEQREQ=?
Response(s)
+CGEQREQ: <PDP_type>, (list of supported
UL>s), (list of supported
(list of supported
<Guaranteed bitrate
supported
<Maximum SDU
<Residual bit error
supported
<Transfer
OK
Read Command
AT+CGEQREQ?
Response(s)
[+CGEQREQ: <cid>, (list of supported
UL>s), (list of supported
(list of supported
<Guaranteed bitrate
supported
<Maximum SDU
<Residual bit error
supported
<Transfer
[+CGEQREQ: ...]
Write Command
AT+CGEQREQ=[<cid>[,
<Guaranteed bitrate
size>[, <SDU error
SDUs>[, <Transfer delay>[,
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
3GPP TS 27.007
Command Description
The test command returns values supported as a compound value.
The read command returns the current settings for each defined context.
The write command allows the TE to specify a Quality of Service Profile for the context identified by the (local)
context identification parameter
message to the network.
A special form of the write command,
to become undefined.
<cid>
and will undefine the QoS profiles of every context which is not active or not online.
AT&F ATZ
Parameter Description
(num)
<cid>
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
used in other PDP context-related commands.
1...2
TC63_ATC_V00.490
Confidential / Draft - Do not copy
<Traffic
DL>s), (list of supported
<Maximum bitrate
DL>s), (list of supported
size>s), (list of supported
ratio>s), (list of supported
delay>s), (list of supported
<Traffic
DL>s), (list of supported
<Maximum bitrate
DL>s), (list of supported
size>s), (list of supported
ratio>s), (list of supported
delay>s), (list of supported
<Traffic class>[, <Maximum bitrate
UL>[, <Guaranteed bitrate
ratio>[, <Residual bit error
<Traffic handling
which is used when the MT sends an Activate PDP Context Request
<cid>
AT+CGEQREQ=<cid>
Page 283 of 501
class>s), (list of supported
<Guaranteed bitrate
<Delivery
ratio>s), (list of supported
<SDU error
<Delivery of erroneous
<Traffic handling
class>s), (list of supported
<Guaranteed bitrate
<Delivery
ratio>s), (list of supported
<SDU error
<Delivery of erroneous
<Traffic handling
UL>[, <Maximum bitrate
DL>[, <Delivery
ratio>[, <Delivery of erroneous
priority>]]]]]]]]]]]]]
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
causes the requested profile for context number
s
<Maximum bitrate
UL>s),
order>s), (list of
SDUs>s), (list of
priority>s)
<Maximum bitrate
UL>s),
order>s), (list of
SDUs>s), (list of
priority>s)]
DL>[,
order>[, <Maximum SDU
% % % !
Last
% !
5/24/05