At+Ccwa Call Waiting - Siemens TC63 Command Set

TC63 AT Command Set
9.7 AT+CCWA
9.7

AT+CCWA Call Waiting

The write command controls the "Call Waiting" supplementary service according to GSM 02.83. Acti-
AT+CCWA
vation, deactivation and status query are supported. The read command returns the current value of <n>.
Syntax
Test Command
AT+CCWA=?
Response(s)
+CCWA:(list of supported <n>s)
OK
Read Command
AT+CCWA?
Response(s)
+CCWA:<n>
OK
Write Command
AT+CCWA=[[<n>][, <mode>][, <class>]]
Response(s)
If is not equal 2 and command successful:
<mode>
OK
If <mode>= 2 and command successful:
+CCWA: <status>, <class>
[+CCWA: <status>, <class>]
[+CCWA: ...]
OK
If error is related to ME functionality
+CME ERROR
Reference(s)
GSM 07.07, GSM 02.04, GSM 02.83,
GSM 03.83, GSM 04.83
Unsolicited Result Codes
URC 1
Indication of a call that is currently waiting and can be accepted.
+CCWA: <calling
If <n>=1 and the call waiting supplementary service is enabled in the network, URC "+CCWA" indicates a wait-
ing call to the TE. It appears while the waiting call is still ringing.
URC 2
Indication of a call that has been waiting.
^SCWA
If <n>=1 and the call waiting supplementary service is enabled in the network, this URC indicates that a wait-
ing call rang when the ME was in online mode during a CSD call, but the calling party hung up before the ME
went back to command mode.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
number>, <type of number>, <class>, ,
Page 218 of 501
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
<CLI validity>
s
% % % !
Last
! !
5/24/05