At&D Set Circuit Data Terminal Ready (Dtr) Function Mode - Siemens TC63 Command Set

TC63 AT Command Set
4.3 AT&D
4.3 AT&D Set circuit Data Terminal Ready (DTR) function mode
The determines how the TA responds when circuit 108/2 (DTR) is changed from ON to OFF during data
AT&D
mode.
Syntax
Exec Command
AT&D[<value>]
Response(s)
OK
Reference(s)
V.250
Parameter Description
(num)(&W)(&V)
<value>
[0]
1
(&F)
2
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
!
TA ignores status of DTR.
ON->OFF on DTR: Change to command mode while retaining the connected
call.
ON->OFF on DTR: Disconnect data call, change to command mode. During
state DTR = OFF auto-answer is off.
Page 91 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% § % %
s
Last
% % ! % !
5/24/05