At+Cscb Select Cell Broadcast Message Indication - Siemens TC63 Command Set

TC63 AT Command Set
13.14 AT+CSCB
13.14

AT+CSCB Select Cell Broadcast Message Indication

Syntax
Test Command
AT+CSCB=?
Response(s)
+CSCB: (list of supported <mode>s)
OK
Read Command
AT+CSCB?
Response(s)
+CSCB: <mode>, <mids>,
OK
Write Command
AT+CSCB=[<mode>[, <mids>[, <dcss>]]]
Response(s)
OK
Reference(s)
GSM 07.05
Command Description
Test command returns supported modes as a compound value.
Write command selects which types of CBMs are to be received by the ME.
Parameter Description
(num)(&W)
<mode>
Message mode
[0]
1
(str)
<mids>
Cell Broadcast Message ID specification
• For <mode>=0: Six different possible combinations of CBM IDs (e.g. "0,1,5,320-478,922,2000-3000"), default
is empty string.
In certain configurations, e.g. if using SIMs that contain data in Elementary File EF-CBMID (Cell Broadcast
Message Identifier for Data download) less than six combinations may be available.
To access a SIM's Elementary File data refer to command AT+CRSM.
• For <mode>=1: One CBM ID or range of IDs (e.g. "320-478"), default is empty string.
(str)
<dcss>
CBM data coding scheme specification
All different possible combinations of CBM data coding schemes (e.g. "0-3,5"). Using default empty string leads
to get all CBMs independent of their dcss.
A given replaces any former value and is used for consecutive requests.
<dcss>
TC63_ATC_V00.490
Confidential / Draft - Do not copy
<dcss>
PIN
%
Accept messages that are defined in
Forbid messages that are defined in
Page 343 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
and
<mids>
and
<mids>
s
Last
% % ! % !
<dcss>
<dcss>
5/24/05