Atx Set Connect Result Code Format And Call Monitoring - Siemens TC63 Command Set

TC63 AT Command Set
2.6 ATX
2.6

ATX Set CONNECT result code format and call monitoring

determines whether or not the TA detects the presence of dial tone and busy signal and whether or not TA
ATX
transmits particular result codes.
Syntax
Exec Command
ATX[<value>]
Response(s)
OK
ERROR
Reference(s)
V.250
Parameter Description
(num)(&W)(&V)
<value>
[0]
1
2
3
(&F)
4
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
!
CONNECT result code only returned, dial tone and busy detection are both dis-
abled.
CONNECT result code only returned, dial tone and busy detection are
<text>
both disabled.
CONNECT result code returned, dial tone detection is enabled, busy
<text>
detection is disabled.
CONNECT result code returned, dial tone detection is disabled, busy
<text>
detection is enabled.
CONNECT result code returned, dial tone and busy detection are both
<text>
enabled.
Page 37 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
s
Last
% % ! % !
5/24/05