At^srsm Remote Sim Access Message - Siemens TC63 Command Set

TC63 AT Command Set
15.2 AT^SRSM
15.2

AT^SRSM Remote SIM Access Message

This command is used to transfer SAP messages between devices acting as SAP server and client. It is appli-
cable for XSAP data format only, for details please refer to parameter
The write command transports SAP messages into an ME acting as SAP server or client.
Syntax
Test Command
AT^SRSM=?
Response(s)
OK
Write Command
AT^SRSM=<RsaDevId>, <RsaMsgId>[, <RsaMsgData>[, <RsaMsgLen>[, <RsaMsgRc>]]]
Response(s)
OK
Reference(s)
SIEMENS
Unsolicited Result Code
^SRSM: <RsaDevId>, <RsaMsgId>[, <RsaMsgData>[, <RsaMsgLen>[, <RsaMsgRc>]]]
This URC is issued by an ME acting as SAP server or client to transfer SAP message data.
Parameter Description
(num)
<RsaDevId>
RSA device identification
Number assigned by the host on RSA activation via AT^SRSA, parameter <devId>.
(num)
<RsaMsgId>
RSA message identification
For details refer to Section 15.2.1,
sage Parameter.
(str)
<RsaMsgData>
RSA message data
For details refer to Section 15.2.1,
sage Parameter.
(num)
<RsaMsgLen>
RSA message data length
For details refer to Section 15.2.1,
sage Parameter.
(num)
<RsaMsgRc>
RSA message result code
For details refer to Section 15.2.1,
sage Parameter.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
! %
SAP Request Message Parameter
SAP Request Message Parameter
SAP Request Message Parameter
SAP Request Message Parameter
Page 380 of 501
of command AT^SRSA.
<dataForm>
! % % %
and Section 15.2.2,
and Section 15.2.2,
and Section 15.2.2,
and Section 15.2.2,
s
Last
% ! % !
SAP Response Mes-
SAP Response Mes-
SAP Response Mes-
SAP Response Mes-
5/24/05