Siemens TC63 Command Set page 183

TC63 AT Command Set
8.3 AT^SOPS
<eonsOperator>
Operator name; format depends on the source of the operator name, specified by <eonsType>.
(str)
<servProvider>
Service Provider Name according to setting of Service No. 17 in the SIM Service Table (EF
<opName>
Operator
Operator name in numerical presentation contains the GSM Location Area Identification (LAI) number, which
consists of the 3-digit Mobile Country Code (MCC) plus the 2- or 3-digit Mobile Network Code (MNC).
Parameter is stored non-volatile to the SIM.
(num)
<mode>
Parameter is not applicable.
(num)
<format>
Parameter is not applicable.
Note
• The Test command is only accepted by the module after a valid pin has been entered.
AT^SOPS
TC63_ATC_V00.490
Confidential / Draft - Do not copy
Page 183 of 501
s
).
SST
5/24/05