Siemens TC63 Command Set page 246

TC63 AT Command Set
10.2 AT^SISS
hcContent
hcContLen
hcUsrAgent
hcMethod
TC63_ATC_V00.490
Confidential / Draft - Do not copy
If "url-path" contains the IP address and has a slash '/' appended a detailed
directory listing is requested.
"type": [a)scii | i)mage | d)irectory]
"size": Specifies the total amount of upload data. For each part, the trans-
mission is triggered by the URC "^SISW: x, 1", then the
mand can be executed. After the last packet the URC "^SISW: x, 2"
indicates that all data have been transferred and the FTP connection is shut
down. Afterwards, the service can be closed with AT^SISC.
If "size" is not given the upload procedure is the same, except that the
AT^SISC=0 command must be executed after sending the last packet, and
the URC "^SISW: x, 2" will appear afterwards to indicate the end of data
transfer.
"mode": [u)nique | a)ppend | d)elete]
"u)nique" selects the FTP Store Unique command to create a file name
unique to the current directory. If the file name is assigned by the server
then the "^SIS" URC will appear, indicating
file name.
"d)elete" clears given 'element name'.
If "mode" is omitted "replace mode" is default setting.
HTTP
3.
- HTTP client URL
"http://'server'/'path':'tcpPort' "
"server": FQDN or IP-address
"path": path of file or directory
"tcpPort": If parameter is omitted the service connects to HTTP default
port 80.
Refer to "IETF-RFC 2616".
SMTP
4.
- SMTP server address (string).
Length: 4 ... 256.
POP3
5.
- POP3 server address (string).
Length: 4 ... 256.
Optional parameter for HTTP method "Post".
Can be used to transfer a small amount of data. The content of this string will
only be sent if "hcContLen" = 0. The maximum length of "hcContent" is 128
bytes.
To transmit a larger amount of data "hcContLen" must be set to a non-zero
value. In this case the "hcContent" string will be ignored, and data transmission
from the client to the server is done with AT^SISW.
Mandatory parameter for HTTP method "Post".
The content length shall be set in the header of the HTTP "Post" request before
the data part is transferred.
If "hcContLen" = 0 then the data given in the "hcContent" string will be posted.
If "hcContLen" > 0 then the
the client to the server. In this case, "hcContLen" specifies the total amount of
data to be sent. The data can be sent in one or several parts. For each part,
the transmission is triggered by the URC "^SISW: x, 1", then the
command can be executed. Finally, the URC "^SISW: x, 2" indicates that all
data have been transferred and the service can be closed with AT^SISC.
The user agent string must be set by the application to identify the mobile. Usu-
ally operation system and software version info is set with this browser identi-
fier.
HTTP method specification: 0=GET, 1=POST, 2=HEAD.
Page 246 of 501
<urcInfoId>
command will be used to send data from
AT^SISW
s
write com-
AT^SISW
2100 and the
write
AT^SISW
5/24/05