At+Cgpaddr Show Pdp Address - Siemens TC63 Command Set

TC63 AT Command Set
11.9 AT+CGPADDR
11.9

AT+CGPADDR Show PDP address

Syntax
Test Command
AT+CGPADDR=?
Response(s)
[+CGPADDR: (list of defined <cid>s)]
OK
Write Command
AT+CGPADDR=[<cid>[,<cid>]]
Response(s)
[+CGPADDR: <cid>, <PDP_address>]
[+CGPADDR: <cid>, <PDP_address>]
OK
ERROR
+CME ERROR
Reference(s)
GSM 07.07
Command Description
The test command returns a list of defined <cid>s.
The write command returns a list of PDP addresses for the specified context identifiers. If no
the addresses for all defined contexts are returned.
Parameter Description
(num)
<cid>
A numeric parameter which specifies a particular PDP context definition (see
(str)
<PDP_address>
A string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic.
Note
• If no is specified, the write command will return a list of all defined contexts.
<cid>
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
Page 287 of 501
s
% % % !
is specified,
<cid>
command).
AT+CGDCONT
Last
% !
5/24/05