Siemens TC63 Command Set page 280

TC63 AT Command Set
11.7 AT+CGEQMIN
Parameter Description
(num)
<cid>
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
used in other PDP context-related commands.
1...2
(num)
<Traffic class>
0
1
2
3
[4]
<Maximum bitrate UL>
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0]
1...63
64...128
256
512
<Maximum bitrate DL>
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0]
1...63
64...256
512
<Guaranteed bitrate UL>
This parameter indicates the guaranteed number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQMIN=...,32,...).
[0]
1...63
64...128
<Guaranteed bitrate DL>
This parameter indicates the guaranteed number of kbits/s delivered by UMTS (down-link traffic) at a SAP (pro-
vided that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQMIN=...,32,...).
[0]
1...63
64...256
TC63_ATC_V00.490
Confidential / Draft - Do not copy
conversational
streaming
interactive
background
subscribed value
(num)
subscribed value
(value needs to be divisible by 8 without remainder)
(num)
subscribed value
(value needs to be divisible by 8 without remainder)
(num)
subscribed value
(value needs to be divisible by 8 without remainder)
(num)
subscribed value
(value needs to be divisible by 8 without remainder)
Page 280 of 501
s
5/24/05