Siemens TC63 Command Set page 397

TC63 AT Command Set
17.4 AT+CPBS
"MC"
"RC"
(num)
<used>
Value indicating the number of used locations in selected memory storage.
(num)
<total>
Value indicating the maximum number of locations allowed in the selected memory storage.
Notes
• The read command can be used only after the phonebook data from the SIM have been read suc-
AT+CPBS
cessfully for the first time. Reading starts after successful SIM authentication has been performed, and may
take up to 30 seconds depending on the SIM used. While the initial read process is in progress, an attempt
to use any of the phonebook commands will result in "+CME Error: 14" (SIM busy).
We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC notifies
the user when SIM data are accessible after SIM PIN authentication. The URC will be delivered once the ME
has completed reading data from the SIM card.
• If the SIM card is changed, all records of the "MC", "RC" and "LD" phonebooks stored on the ME will be
deleted automatically. If the same SIM is removed and reinserted, no automatic deletion is performed. Calls
made after last switch-on will be lost from "MC", "RC" and "LD" phonebook, if the SIM is removed and rein-
serted during normal operation.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
Missed (unanswered received) calls list
Capacity: max. 10 entries
Location: ME
command is not applicable to this storage. The MC list can be
AT+CPBW
deleted with AT^SPBD.
Received calls list
Capacity: max. 10 entries
Location: ME
command is not applicable to this storage. The RC list can be
AT+CPBW
deleted with AT^SPBD.
Page 397 of 501
s
5/24/05