TC63 AT Command Set
1.4 AT Command Syntax
1.4
AT Command Syntax
The "AT" or "at" prefix must be set at the beginning of each command line. To terminate a command line enter
. Commands are usually followed by a response that includes "
<CR>
out this document, only the responses are presented,
Table 1.4:
Types of AT commands and responses
AT command type
Test command
Read command
Write command
Exec(ution) command
1.4.1
Using Parameters
•
Optional parameters are enclosed in square brackets. If optional parameters are omitted, the current settings
are used until you change them.
•
Optional parameters or subparameters can be omitted unless they are followed by other parameters. If you
want to omit a parameter in the middle of a string it must be replaced by a comma. See also example 1.
•
A parameter value enclosed in square brackets represents the value that will be used if an optional parameter
is omitted. See also example 2.
•
When the parameter is a character string, e.g.
marks, e.g. "Charlie Brown" or "+49030xxxx". Symbols in quotation marks will be recognized as strings.
•
All spaces will be ignored when using strings without quotaton marks.
•
It is possible to omit the leading zeros of strings which represent numbers.
•
If an optional parameter of a V.250 command is omitted, its value is assumed to be 0.
Example 1: Omitting parameters in the middle of a string
AT+CCUG?
+CCUG: 1,10,1
OK
AT+CCUG=,9
OK
AT+CCUG?
+CCUG: 1,9,1
OK
Example 2: Using default parameter values for optional parameters
AT+CFUN=7,0
OK
AT+CFUN?
+CFUN: 7
OK
AT+CFUN=
OK
+CFUN: 1
OK
TC63_ATC_V00.490
Confidential / Draft - Do not copy
Syntax
Function
AT+CXXX=?
The mobile equipment returns the list of parameters and value
ranges set with the corresponding Write command or by internal
processes.
AT+CXXX?
This command returns the currently set value of the parameter or
parameters.
AT+CXXX=<...>
This command sets user-definable parameter values.
AT+CXXX
The execution command reads non-variable parameters deter-
mined by internal processes in the GSM engine.
<text>
Query current setting
Set only the middle parameter
Query new setting
Activate CYCLIC SLEEP mode, don't reset ME
Query ME mode
Set ME back to normal (default parameters: 1,0)
Page 18 of 501
<response>
<CR><LF>
are omitted intentionally.
<CR><LF>
or <number>, the string must be enclosed in quotation
s
". Through-
<CR><LF>
5/24/05