Example: Default Values Of A Csd Connection Profile; Example: Gprs Connection Profile - Siemens TC63 Command Set

TC63 AT Command Set
10.1 AT^SICS
<conParmValue-authMode>
Supported authentication mode values in
the
<conParmValue-authMode>
"none"
["PAP"]
"CHAP"
"MsChapV1"
10.1.1

Example: Default values of a CSD connection profile

As stated earlier, the "conType" selected with
to this "conType". Once "conType" is set in a new profile, the default values of all other related parameters are
assumed. To view the default settings you can use the read command AT^SICS?.
at^sics=1,conType,CSD
OK
at^sics?
^SICS: 0, "conType", ""
^SICS: 1, "conType", "CSD"
^SICS: 1, "alphabet", "0"
^SICS: 1, "user", ""
^SICS: 1, "passwd", ""
^SICS: 1, "authMode", "PAP"
^SICS: 1, "inactTO", "0"
^SICS: 1, "calledNum", ""
^SICS: 1, "dataRate", "1"
^SICS: 1, "dataType", "1"
^SICS: 2, "conType", ""
^SICS: 3, "conType", ""
^SICS: 4, "conType", ""
^SICS: 5, "conType", ""
OK
10.1.2

Example: GPRS connection profile

at^sics=0,conType,GPRS0
OK
AT^SICS=0,inactTO,"0"
OK
AT^SICS=0,dns1,"193.254.160.1"
OK
AT^SICS=0,authMode,"PAP"
OK
AT^SICS=0,passwd,t-d1
OK
TC63_ATC_V00.490
Confidential / Draft - Do not copy
(str)
<conParmValue>
will restore the password to its default ("").
determines all other matching profile parameters related
AT^SICS
Page 240 of 501
for value "authMode". Changing
<conParmTag>
Select connection type CSD, identified by
ProfileId>1
Query current profiles.
Profile with
<conProfileId>
The new CSD profile just created is indicated with all
related parameters set to their default.
Character set determined with
when string parameters are input with AT^SICS.
No user name set.
No password set.
Authentication protocol PAP is assumed as default.
No inactivity timeout set.
No destination set.
Data rate set to 9.6 kbaud.
Remote device is analog, e.g. an analog modem.
Profile with
<conProfileId>
Profile with
<conProfileId>
Profile with
<conProfileId>
Profile with
<conProfileId>
Select connection type GPRS0.
Inactivitiy timeout = 0 (default).
IP address of Primary DNS server.
Authentication protocol PAP (default).
Password for GPRS services provided by the Ger-
man operator T-D1.
s
<con-
0 is still empty.
applies
AT+CSCS
2 is still empty.
3 is still empty.
4 is still empty.
5 is still empty.
5/24/05