Siemens TC63 Command Set page 322

TC63 AT Command Set
13.1 SMS parameters
(num)
<ref>
Reference number to identify all segments of the concatenated SMS (i.e. the number needs to be the same for
each segment). If <ieia>=8 then max=255, otherwise 65535.
0...255
0...65535
(num)(+CSCS)
<sca>
Service Center Address
GSM 04.11 RP SC address Address-Value field in string format; BCD numbers (or GSM default alphabet char-
acters) are converted to characters of the currently selected TE character set (refer to command AT+CSCS); type
of address given by
<tosca>
(num)
<scts>
Service Centre Time Stamp
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer <dt>)
(num)
<seq>
Sequence number of the concatenated SMS beginning with 1. The number must be incremented by one for
each segment of the concatenated short message.
<seq>=0 means: ignore the value. This will result in a non-concatenated SMS.
0...255
(num)
<sn>
Serial Number
GSM 03.41 CBM Serial Number in integer format
(num)
<st>
Status
GSM 03.40 TP-Status in integer format
0...255
(str)
<stat>
Message status
3GPP 27.005 Interface of SMS and CB. Indicates the status of message in memory.
Description
Received unread mes-
sages
Received read messages "REC READ"
Stored unsent messages
Stored sent messages
All messages
TC63_ATC_V00.490
Confidential / Draft - Do not copy
text mode (<mode>=1)
"REC UNREAD"
"STO UNSENT"
"STO SENT"
"ALL"
Page 322 of 501
PDU mode (<mode>=0)
0
1
2
3
4
s
Default
for SMS reading com-
mands
for SMS writing com-
mands
5/24/05