At^scmw Write Concatenated Sms Messages To Memory - Siemens TC63 Command Set

TC63 AT Command Set
13.21 AT^SCMW
13.21

AT^SCMW Write concatenated SMS messages to memory

Writing a concatenated message to the memory is similar to writing a "normal" message, except that each seg-
ment of the concatenated message must be identified by the additional parameters <seq>,
To store all segments of the message one by one, the
ment.
Syntax
Test Command
AT^SCMW=?
Response(s)
OK
Write Command
If text mode (see AT+CMGF=1)
AT^SCMW=<oa>/<da>, [<tooa>/<toda>][, <stat>], <seq>, <max>, <ieia>,
entered. /
<CTRL-Z> <ESC>
Response(s)
^SCMW: <index>
OK
If writing fails
ERROR
+CMS ERROR
Reference(s)
SIEMENS
Command Description
The write commands transmits one segment of a concatenated SMS (either SMS-DELIVER or SMS-SUBMIT)
from TE to memory storage <mem2>. Memory location
status will be set to 'stored unsent' unless otherwise given in parameter <stat>.
Notes
• Command is only available if AT+CMGF=1.
• To send or delete a concatenated short message please use the known SMS commands, see
sending and
AT+CMGD
• See notes provided for AT+CMGW.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
for deleting.
Page 354 of 501
write command must be executed for each seg-
AT^SCMW
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
of the stored message is returned. Message
<index>
s
and <ref>.
<ieia>
Text can be
<ref>
<CR>
% % % !
AT+CMSS
Last
% !
for
5/24/05