Siemens TC63 Command Set page 97

TC63 AT Command Set
4.7 AT+IFC
Notes
• When using XON/XOFF flow control (AT+IFC=1,x or AT+IFC=3,x) in data mode,
while the data transmission is paused with XOFF. Before entering the command mode with
transmission should be resumed using the XON character.
• For compatibility reasons, the
take effect. However, be aware that whenever you use the
then save the current configuration to the user profile with AT&W, the changed
active after restart.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
command can be used in Multiplex mode, though the settings will not
AT+IFC
Page 97 of 501
+++
write command in Multiplex mode and
AT+IFC
AT+IFC
s
should not be used
the paused
+++
setting will become
5/24/05