At^splr Read Entry From The Preferred Operators List - Siemens TC63 Command Set

TC63 AT Command Set
8.15 AT^SPLR
8.15

AT^SPLR Read entry from the preferred operators list

The write command returns used entries from the SIM list of preferred operators with
AT^SPLR
between and <index2>. If
<index1>
mand returns the whole index range supported by the SIM.
See also GSM 07.07: AT+CPOL
Syntax
Test Command
AT^SPLR=?
Response(s)
^SPLR:(list of supported) <indexa>s
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SPLR=<index1>[, <index2>]
Response(s)
^SPLR: <index1><oper>
^SPLR: <index2><oper>
OK
ERROR
+CME ERROR: <err>
Reference(s)
SIEMENS
Parameter Description
(num)
<index1>
Location number to start reading from
(num)
<index2>
Location number where to stop reading
(num)
<indexa>
Index range supported by the SIM card (between
(str)
<oper>
Operator in numeric form; GSM location area identification number
TC63_ATC_V00.490
Confidential / Draft - Do not copy
is not given, only entry at
<index2>
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% %
and <index2>)
<index1>
Page 205 of 501
is returned. The test com-
<index1>
% % % %
s
<indexa>
Last
% ! % !
5/24/05