Siemens TC63 Command Set page 225

TC63 AT Command Set
9.9 AT+CLIP
Parameter Description
(num)(&W)(&V)
<n>
(&F)
[0]
1
(num)(&V)
<m>
0
1
2
(str)
<number>
string type phone number of calling address in format specified by
(num)
<type>
type of address octet in integer format; 145 when dialling string includes in-ternational access code character
"+", otherwise 129.
(str)
<alpha>
string type alphanumeric representation of
character set should be the one selected with command Select TE Character Set
(num)
<CLI validity>
0
1
2
When CLI is not available (
will not be significant. Nevertheless, TA shall return the recommended value 128 for
unknown in accordance with GSM 04.08 subclause 10.5.4.7).
When CLI has been withheld by the originator,
"override category" option (refer GSM 02.81 and GSM 03.81),
TA shall return the same setting for
TC63_ATC_V00.490
Confidential / Draft - Do not copy
suppress unsolicited result codes
display unsolicited result codes
CLIP not provisioned
CLIP provisioned
unknown
<number>
CLI valid
CLI has been withheld by the originator.
CLI is not available due to interworking problems or limitations of originating
network.
<number>
significant.
<CLI validity>=2), <number>
(<CLI
and
<number> <type>
Page 225 of 501
<type>
corresponding to the entry found in phonebook; used
shall be an empty string ("") and
shall be an empty string ("") and
validity>=1) and the CLIP is provisioned with the
and
<number>
as if the CLI was not available.
s
AT+CSCS
value will not be
<type>
<type>
(TON/NPI
<type>
is provided. Otherwise,
<type>
5/24/05
value