Siemens TC63 Command Set page 341

TC63 AT Command Set
13.12 AT+CPMS
(num)
<total3>
Number of messages storable in
Notes
• The Mobile Equipment storage ''ME'' offers space for 25 short messages, see <mem1>.
• ''MT'' is the sum of ''ME'' (= 25 locations) and ''SM'' (capacity varies with SIM card). The indices
the ''MT'' storage are dependent on the order selected with
• The <mem1>,
<mem2>
• The user should be aware that the setting ''MT'' involves ''ME'' and ''SM'', with ''ME'' being filled up first. If the
''ME'' storage is full, TC63 will proceed with the ''SM'' storage.
Incoming Class 1 short messages (ME specific) will be preferably stored to ''ME'' and may be transferred to
the ''SM'' storage if ''ME'' is used up.
Incoming Class 2 messages (SIM specific) will be stored to the SIM card only, no matter whether or not there
is free ''ME'' space. As a result, the ^SMGO: 2 indication (see AT^SMGO) may be presented without prior indi-
cation of ^SMGO: 1. For more information regarding SIM and ME specific message classes refer to
and the following specifications: GSM 03.38 and 3GPP TS23038.
• Multiplexer: In Multiplex mode or when the two physical serial interfaces are connected, the parameter
will be the same on all instances, but the settings of
<mem3>
/ interface. As a result, changes on parameter
ferences values for other instanes can result in not desired behaviours like different outputs for
so on.
• While equals ''SM'' and
<mem3>
''ME'', the freed space on ''ME'' is reclaimed for new incoming short messages, when there is no space left on
the ''SM'' storage. As it is often the clients concern to have received short messages stored only to the SIM
card, inconsistent settings should be generally avoided. This can be achieved simply by using the same
parameter for all memory indices.
• The indices
<index>
TC63_ATC_V00.490
Confidential / Draft - Do not copy
<mem3>
and parameter will be stored in non-volatile memory.
<mem3>
<mem1>
equals ''ME'' it is possible that, after deleting short messages from
<mem1>
of the storage are dependent on the order selected with AT^SSMSS.
Page 341 of 501
AT^SSMSS
and
<mem1> <mem2>
and/or befor activating the multiplexer or dif-
<mem2>
s
of
<index>
<dcs>
may vary on each channel
and
AT+CMGL
5/24/05