Table 21.2: Abbreviations Of Codes And Parameters Used In Table - Siemens TC63 Command Set

TC63 AT Command Set
21.2 Star-Hash (*#) Network Commands
Star-Hash Code
Call barring
(choice of *,#,*#)33*Pw*BS#
(choice of *,#,*#)331*Pw*BS#
(choice of *,#,*#)332*Pw*BS#
(choice of *,#,*#)35*Pw*BS#
(choice of *,#,*#)351*Pw*BS#
#330*Pw*BS#
#333*Pw*BS#
#353*Pw*BS#
Call Hold / Multiparty
C[C] in call
USSD messages
[C]...[C]#
C[C] (excluded 1[C])
*) Notes on ^SCCFC, +CCWA, ^SCLCK: The output depends on the affected basic service of the Star-Hash code. One line
will be output for every tele- or bearer service coded in basic service code BS.
^SCCFC and ^SCLCK are modified by giving an additional <reason> or <fac> in front of the regular output string gener-
ated by the standard commands +CCFC and +CLCK.

Table 21.2: Abbreviations of Codes and Parameters used in Table

Abbreviation Meaning
ZZ Type of supplementary services:
Barring services
All services
DN Dialing number
BS Basic service equivalent to parameter class:
Voice
FAX
SMS
SMS+FAX
Data circuit asynchron
Data circuit synchron
dedicated PAD access
dedicated Packet access
Data circuit asynchron+PAD
Data circuit synchron+Packet
Data circuit asynchron+synchron+Packet+PAD
All Services
T Time in seconds
TC63_ATC_V00.490
Confidential / Draft - Do not copy
Functionality
Act/deact/int BAOC
Act/deact/int BAOIC
Act/deact/int BAOIC exc.home
Act/deact/int. BAIC
Act/deact/int BAIC roaming
Deact. All Barring Services
Deact. All Outg.Barring Services
Deact. All Inc.Barring Services
Call hold and multiparty
Send USSD message
Send USSD message
21.1
Page 464 of 501
s
Response, also refer to Table
^SCLCK : <fac>, <status>, <class>
*)
[, ...] like +CLCK (Refer to
AT+CLCK)
see above
see above
see above
see above
see above
see above
see above
+CME ERROR: <err> / OK
+CME ERROR: <err> / OK
+CME ERROR: <err> / OK
Value
330
Not specified
String of digits 0-9
11
13
16
12
25
24
27
26
21
22
20
--
In contrast to AT+CCFC, parameter
T has no default value. If T is not
specified, an operator defined
default or the last known value may
be used, depending on the network
operator.
21.3
5/24/05