Siemens TC63 Command Set page 286

TC63 AT Command Set
11.8 AT+CGEQREQ
(num)
<Transfer delay>
This parameter indicates the targeted time between request to transfer an SDU at one SAP to its delivery at the
other SAP, in milliseconds.
[0]
10...150
200...950
1000...4000
<Traffic handling priority>
This parameter specifies the relative importance for handling of all SDUs belonging to the UMTS bearer com-
pared to the SDUs of the other bearers.
[0]
1
2
3
(str)
<PDP_type>
Packet Data Protocol Type
"IP"
Notes
• If parameters are not defined, the parameter default values depend on the HLR-stored subscribed default val-
ues.
• Definitions of parameters can be found in 3GPP TS 23.107
TC63_ATC_V00.490
Confidential / Draft - Do not copy
subscribed value
(value needs to be divisible by 10 without remainder)
(value needs to be divisible by 50 without remainder)
(value needs to be divisible by 100 without remainder)
(num)
subscribed
Page 286 of 501
s
5/24/05