At^snfpt Set Progress Tones - Siemens TC63 Command Set

TC63 AT Command Set
18.14 AT^SNFPT
18.14

AT^SNFPT Set progress tones

controls the Call Progress Tones generated at the beginning of a mobile originated call setup.
AT^SNFPT
Please note that the setting is stored volatile, i.e. after restart or reset, the default value 1 will be restored.
Syntax
Test Command
AT^SNFPT=?
Response(s)
^SNFPT: (list of supported <pt>s)
OK
Read Command
AT^SNFPT?
Response(s)
^SNFPT: <pt>
OK
Write Command
AT^SNFPT=<pt>
Response(s)
OK
Reference(s)
SIEMENS
Parameter Description
(num)
<pt>
0
(P)
1
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
!
Disables Call Progress Tones
Enables Call Progress Tones (audible tones shortly heard on the phone when
ME starts to set up a call.)
Page 427 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
s
Last
% % ! % !
5/24/05